TOKO WAX RECOMMENDATION
Cupid Cup
Teton Lakes Golf Course, Rexburg, ID
Saturday, February 13
2 laps for 10K
Forecast/Conditions: Overnight low of 17, start temperature 25. Partially transformed snow, 60 percent cloud cover, no precipitation forecasted.
Glidewax: Apply LF Black, scrape and brush, then apply HF Red, scrape and brush. Finish by crayoning JetStream Red, iron hot (320F) with a layer of fiberlene under the iron, traveling slowly (20 seconds) tip to tail. Brush with a dedicated nylon polishing brush and polish with a thermopad.
Gripwax: Roughen base with 150 grit sandpaper, iron in Nordic Base Wax Green, cork smooth, let cool. Then apply 3 layers of Nordic GripWax Red, corking between layers.
Structure: A universal grind covered by one pass with the Red Structurite tool before JetStream application will best suit these conditions.
Created by Randy Anderson, Toko Tech Team member since 2015. Highbasin@gmail.com
![]()
![]()
![]()
![]()
![]()
Check the WaxTip page at www.TokoUS.com before all of your races for the latest waxing information. The Toko Race Wax Tips offer racers precise waxing advice on how to make your skis perform optimally for a given event. For racers who don’t have top end waxes, skip the Fluorocarbon (JetStream) and substitute the LF or NF wax of the same color (Yellow, Red or Blue). To see optimal application procedures for both Glidewax and Gripwax, go to www.TokoVideos.com.
![]()
![]()
- 10 A.M. Kids,
- 10:30 A.M. Adults
- 10K Skate or Classic, 2.5K Teen Race, Little Kids Loop
2 laps for 10K
Forecast/Conditions: Overnight low of 17, start temperature 25. Partially transformed snow, 60 percent cloud cover, no precipitation forecasted.
Glidewax: Apply LF Black, scrape and brush, then apply HF Red, scrape and brush. Finish by crayoning JetStream Red, iron hot (320F) with a layer of fiberlene under the iron, traveling slowly (20 seconds) tip to tail. Brush with a dedicated nylon polishing brush and polish with a thermopad.
Gripwax: Roughen base with 150 grit sandpaper, iron in Nordic Base Wax Green, cork smooth, let cool. Then apply 3 layers of Nordic GripWax Red, corking between layers.
Structure: A universal grind covered by one pass with the Red Structurite tool before JetStream application will best suit these conditions.
Created by Randy Anderson, Toko Tech Team member since 2015. Highbasin@gmail.com
No comments:
Post a Comment